User's Manual

Page 179 of 187
TECHNICAL MANUAL
Telit GM862 PCS
Tri Band GPRS Data Terminal System Rev.1
2.9.4.9 #SKTSAV – Socket Parameters Save Command
#SKTSAV – Socket Parameters Save Command
Execute command
AT#SKTSAV Saves the actual Parameters of the Socket in the NVM of the device.
The values stored are:
- User Name
- Password
- Packet Size
- Socket inactivity timeout
- Data sending timeout
- Socket type (UDP/TCP)
- Remote port
- Remote address
Read command
Write command
Test command
Example AT#SKTSAV
OK
…socket parameters have been saved in NVM
Note
If some parameters have not been previously specified then a default
value will be taken.
Reference Telit specifications
SW release Version C