User's Manual

Table Of Contents

Page 176 of 187

TECHNICAL MANUAL

Telit GM862 PCS

Tri Band GPRS Data Terminal System Rev.1

2.9.4.5 #SKTTO – Socket inactivity timeout control

#SKTTO – Socket inactivity timeout control

Execute command

Read command

AT#SKTTO? Reports the current value of the parameter <time>.

Write command

AT#SKTTO=<time> This timeout applies when the no data is exchanged in the socket for a

long time and therefore the socket connection is automatically closed

and the GPRS context deactivated.

This command sets the maximum time that the module awaits without

data exchange on the socket before closing the socket and deactivating

the GPRS context.

Parameter:

<time> - socket inactivity timeout in seconds units

0 - no timeout.

1…65535 s

Test command

AT#SKTTO=? Returns the allowed values for the parameter <time>.

Example AT#SKTTO = 30 ( 30 sec. Timeout )

AT#SKTTO?

#SKTTO: 30

Reference Telit specifications

SW release Version C