User's Manual
Table Of Contents
Page 174 of 187
TECHNICAL MANUAL
Telit GM862 PCS
Tri Band GPRS Data Terminal System Rev.1
2.9.4.3 #PKTSZ –Packet Size control
#PKTSZ –Packet Size control
Execute command
Read command
AT#PKTSZ? Reports the current value of the parameter <size>.
Write command
AT#PKTSZ=<size> This command sets the default packet size to be used by the
TCP/UDP/IP stack for data sending.
Parameter:
<size> - packet size in bytes
0 - automatically chosen by the device
1…512 - packet size in bytes
Test command
AT#PKTSZ=? Returns the allowed values for the parameter <size>.
Example AT#PKTSZ = 100
OK
AT#PKTSZ?
#PKTSZ: 100
OK
Reference Telit specifications
SW release Version C