User's Manual

Table Of Contents

Page 161 of 187

TECHNICAL MANUAL

Telit GM862 PCS

Tri Band GPRS Data Terminal System Rev.1

2.7.1.21 #BND – Select Band (DCS 1800 or PCS 1900)

#BND – Select Band (DCS1800 or PCS1900)

Execute command

Read command

AT#BND? Return the current band selected in the format:

#BND: <band>

Write command

AT#BND = <band> Set the band parameter to the Band value.

Parameter

<band>:

0 - DCS 1800MHz

1 - PCS 1900MHz

Note: This setting is maintained even after power off.

Test command

AT#BND=? Returns the supported range of values of the parameter <band>.

Example

Reference Telit GM862-PCS AT Command Specification

SW release Version A