User's Manual
Table Of Contents
Page 158 of 187
TECHNICAL MANUAL
Telit GM862 PCS
Tri Band GPRS Data Terminal System Rev.1
2.7.1.15 #SMOV – SMS Overflow
#SMOV – SMS overflow
Execute command
Read command
AT#SMOV? Return the current status in the format: #SMOV: <mode>.
Write command
AT#SMOV= <mode> Enable the signalling of SMS overflow
Parameter:
<mode> = 0 - disable
<mode> = 1 - enable
If enable, when the maximum storage capacity has came, the
#USMO:<memo> network initiated notification is send.
Test command
AT#SMOV=? Returns the supported range of values of the parameter <mode>.
Example
Reference Telit GM862-PCS AT Command Specification
SW release Version A
2.7.1.16 #SHFEC – Set Handsfree echo canceller
#SHFEC – set handsfree echo canceller
Execute command
Read command
AT#SHFEC? Return the current status in the format: #SHFEC: <mode>.
Write command
AT#SHFEC= <mode> Set echo canceller on audio handsfree output.
Parameter <mode>:
0 - disable echo canceller for headset mode (default)
1 - enable, setting for handsfree mode
2…255 reserved
Note: This setting returns to default after power off.
Test command
AT#SHFEC=? Returns the supported range of values of the parameter <mode>.
Example
Reference Telit GM862-PCS AT Command Specification
SW release Version A