User's Manual

Page 156 of 187
TECHNICAL MANUAL
Telit GM862 PCS
Tri Band GPRS Data Terminal System Rev.1
2.7.1.13 #QSS – Query SIM Status
#QSS – query SIM status
Execute command
Read command
AT#QSS? Reports the query SIM status in the format:
#QSS: <mode>,<status>
where
<mode>: type of enabled notification
<mode> = 0 - query only
<mode> = 1 - send unsolicited indication (#USS) every change of state
<status>: current SIM status
<status> = 0 - SIM NOT INSERTED
<status> =1 - SIM INSERTED
Write command
AT#QSS = <mode> Set the type of notification.
If enabled (mode = 1) at any status change is send:
#USS: <status>
Parameter: <mode>
Test command
AT#QSS=? Returns the supported range of values of the parameter <mode>.
Example
Reference Telit GM862-PCS AT Command Specification
SW release Version A