User's Manual

Page 148 of 187
TECHNICAL MANUAL
Telit GM862 PCS
Tri Band GPRS Data Terminal System Rev.1
2.7.1.6 #SHDN – Software Shut Down
#SHDN – software shutdown
Execute command
AT#SHDN
After the issuing of this command device detaches from the network
and shuts down. Before definitive shut down an OK response is
returned.
Note: after the issuing of this command any previous activity is
terminated and the device will not respond to any further command.
To turn it on again Hardware pin ON/OFF must be tied low.
Read command
Write command
Test command
Example
Reference Telit GM862 AT-GPRS Command Specification
SW release Version A