User's Manual

Page 147 of 187
TECHNICAL MANUAL
Telit GM862 PCS
Tri Band GPRS Data Terminal System Rev.1
2.7.1.4 #STM - Signalling Tones Mode
#STM – signalling tones mode
Execute command
Read command
AT#STM?
Reports the current signaling tones status in the format:#STM: <mode>
Write command
AT#STM = <mode>
Enables/disables the signaling tones output on the audio path selected
with #SRP command
Parameter :
<mode> - signaling tones status
<mode> = 0 - signaling tones disabled
<mode> = 1 - signaling tones enabled
Test command
AT#STM=? Reports supported range of values for <mode> parameter.
Example
Reference Telit GM862-PCS AT Command Specification
SW release Version B
2.7.1.5 #PCT – display PIN Counter
#PCT – display PIN counter
Execute command
Read command
AT#PCT?
Reports the PIN/PUK or PIN2/PUK2 input remaining attempts,
depending on +CPIN requested password in the format:
#PCT:<n>
Note: If +CPIN requires the PIN then max 3 attempts are allowed,
after that the PUK code is requested; if even PUK is input wrong for
other three time then #PCT:0 and SIM remains blocked.
Write command
Test command
Example
Reference Telit GM862 AT-GPRS Command Specification
SW release Version A