User's Manual

Table Of Contents

Page 146 of 187

TECHNICAL MANUAL

Telit GM862 PCS

Tri Band GPRS Data Terminal System Rev.1

2.7.1.3 #SRP –Select Ringer Path

#SRP – select ringer path

Execute command

AT#SRP=<n>

Selects the audio path towards whom sending ringer sounds and all

signaling tones.

Parameter:

<n> - Ringer path number

0 - sound output towards current selected audio path (see

command #CAP)

1 - sound output towards handsfree

2 - sound output towards headset

3 - sound output towards Buzzer Output pin GPIO7

Note: In order to use the Buzzer Output an external circuitry must be

added to drive it properly from the GPIO7 pin, furthermore the

GPIO7 pin direction must be set to Buzzer output (Alternate function)

see command #GPIO.

Read command

AT#SRP?

Reports the current ringer path setting in the format: #SRP:<n>.

Write command

Test command

AT#SRP=? Reports the supported values for the parameter <n>.

Example

AT#SRP=?

#SRP=(0-3)

AT#SRP=3

Reference Telit GM862-PCS AT Command Specification

SW release Version A