User's Manual

Page 141 of 187
TECHNICAL MANUAL
Telit GM862 PCS
Tri Band GPRS Data Terminal System Rev.1
+CMGS – send message
Write command
Test command
Example
Reference GSM 07.05
SW release Version A
2.6.4.2 +CMSS - send message from storage
+CMSS – send message from storage
Execute command
AT+CMSS = <index>
Sends to the network, the message which is already stored in the
<memw> storage (see +CPMS) at the location <index>.
Parameter: <index>
If message is successfully sent to the network, Sends to the network,
then the result is sent in the format:
+CMSS: <mr>
where <mr> is the message reference number.
If message sending fails for some reason, an error code is reported:
+CMS ERROR:<err>
Note: to store a message in the <memw> storage see command
+CMGW.
Care must be taken to ensure that during the command execution,
which might take several seconds, no other SIM interacting
commands are issued.
To avoid malfunctions is suggested to wait for the +CMGS:<mr> or
+CMS ERROR:<err> response before issuing further commands.
Read command
Write command
Test command
Example
Reference GSM 07.05
SW release Version A