User's Manual

Page 129 of 187
TECHNICAL MANUAL
Telit GM862 PCS
Tri Band GPRS Data Terminal System Rev.1
2.6.1.5 +CSDH – Show parameters in text mode
+CSDH –show parameters in text mode
Execute command
Read command
AT+CSDH? Report the current setting in the format:
+CSDH: <show>
Write command
AT+CSDH= <show> Show the additional parameters of received or stored SMS when the
text mode is used (+CMFG=1).
Parameter:
<show> = 0 - no additional parameters are shown
<show> = 1 - parameters set by the +CSCA and + CSMP commands
are shown and the length, sender/addressee address of SMS when
+CMT, +CMGL, +CMGR commands are utilised
Test command
AT+CSDH=?
Reports the supported range of values for the parameter
<show>
Example
Reference GSM 07.05
SW release Version A
2.6.1.6 +CSAS – Save setting text mode
+CSAS –set saving text mode
Execute command
Read command
Write command
AT+CSAS=<profile>
Save setting which have been made by the +CSCA and +CSMP
commands in local volatile memory (or in the SIM if it has a dedicated
storage for this purpose).
Parameter:
<profile>: 0…3 - number of profile in which to save the setting.
The number 0 corresponds to the non volatile memory, the others
correspond to the SIM storage (if available).
Test command
AT+CSAS=? Return the possible range of values for the parameter <profile>.
Example
Reference GSM 07.05
SW release Version A