User's Manual

Page 126 of 187
TECHNICAL MANUAL
Telit GM862 PCS
Tri Band GPRS Data Terminal System Rev.1
2.6 ETSI GSM 07.05 AT Commands for SMS and
CB services
2.6.1 General configuration
2.6.1.1 +CSMS - select message service
+CSMS – select message service
Execute command
Read command
AT+CSMS?
Reports the value of the current parameters in the format:
+CSMS: <service>,<mt>,<mo>,<cb>
where:
<service> - message syntax
0 - SMS syntax as defined in GSM-03.40 and GSM-03.41. AT
commands are compatible with GSM 07.05 Phase 2.
1 - SMS syntax as defined in GSM-03.40 and GSM-03.41. AT
commands are compatible with GSM 07.05 Phase 2+
<mt> - Mobile Terminated Messages
<mo> - Mobile Originated Messages
<cb> - Cell Broadcast Messages
0 - not supported
1 - supported
Write command
AT+CSMS = <service>
Selects the SMS & CB services command syntax.
Parameter:
<service> = 0 - SMS syntax as defined in GSM-03.40 and GSM-
03.41. AT commands are compatible with GSM 07.05 Phase 2.
<service> = 1 - SMS syntax as defined in GSM-03.40 and GSM-03.41.
AT commands are compatible with GSM 07.05 Phase 2+
Test command
AT+CSMS=? Reports the supported value of the parameter <service> = 0.
Example
Reference GSM 07.05
SW release Version A