User's Manual

Page 123 of 187
TECHNICAL MANUAL
Telit GM862 PCS
Tri Band GPRS Data Terminal System Rev.1
3.3.7.2 +CGQMIN - quality of service profile (minimum acceptable)
+ CGQMIN – quality of service profile (minimum acceptable)
Execute command
Read command
AT+CGQMIN?
Returns the current settings for each defined context in the format:
+CGQMIN: <cid>,<precedence>,<delay>,<reliability>,<peak>,<mean>
Example
Write command
AT+CGQMIN = [<cid>
[,<precedence >
[,<delay> [,<reliability>
[,<peak> [,<mean>]]]]]]
This command allows to specify a minimum acceptable profile which
is checked by the terminal against the negotiated profile returned in the
Activate PDP Context Accept message
Parameters:
<cid> - PDP context identification (see +CGDCONT command).
The following parameters are defined according to GSM 03.60:
<precedence> - precedence class
<delay> - delay class
<reliability> - reliability class
<peak> - peak throughput class
<mean> - mean throughput class
If a value is omitted for a particular class then this class is not checked.
Test command
AT+CGQMIN=?
Returns values supported as a compound value.
Example AT+CGQMIN=1,0,0,3,0,0
OK
AT+CGQMIN?
+CGQMIN: 1,0,0,5,0,0
OK
AT+CGQMIN=?
+CGQMIN: (0-3),(0-3),(0-5),(0-9),(0-19,31)
OK
Reference GSM 07.07
SW release Version A