User's Manual

Page 118 of 187
TECHNICAL MANUAL
Telit GM862 PCS
Tri Band GPRS Data Terminal System Rev.1
2.5.7.2 +CGATT - GPRS attach or detach
+ CGATT – GPRS attach or detach
Execute command
AT+CGATT = <state>
The command is used to attach the terminal to, or detach the terminal
from, the GPRS service depending on the parameter <state>.
Parameter:
<state> - indicates the state of GPRS attachment
0 - detached
1 - attached
Read command
AT+CGATT?
Returns the current GPRS service state.
Write command
Test command
AT+CGATT=?
Requests information on the supported GPRS service states.
Example AT+CGATT?
+CGATT: 0
OK
AT+CGATT=?
+CGATT: (0,1)
OK
AT+CGATT=1
OK
Reference GSM 07.07
SW release Version A