User's Manual

Page 117 of 187
TECHNICAL MANUAL
Telit GM862 PCS
Tri Band GPRS Data Terminal System Rev.1
2.5.7 Commands For GPRS
2.5.7.1 +CGACT - PDP context activate or deactivate
+ CGACT – PDP context activate or deactivate
Execute command
Read command
AT+CGACT?
Returns the current activation states for all the defined PDP contexts.
Write command
AT+CGACT = <state>[,
<cid>[, <cid>[,…]]]]
The command is used to activate or deactivate the specified PDP
context (s)
Parameters:
<state> - indicates the state of PDP context activation
0 - deactivated
1 - activated
<cid> - a numeric parameter which specifies a particular PDP context
definition (see +CGDCONT command)
Test command
AT+CGACT=?
Reports information on the supported PDP context activation states
parameters in the format: +CGACT: (0,1)
Example
AT+CGACT?
+CGACT: 1,1
OK
AT+CGACT=1,1
OK
Reference GSM 07.07
SW release Version A