User's Manual

Page 114 of 187
TECHNICAL MANUAL
Telit GM862 PCS
Tri Band GPRS Data Terminal System Rev.1
2.5.5 Mobile equipment errors
2.5.5.1 +CMEE - report mobile equipment error
+CMEE – report mobile equipment error
Execute command
Read command
Write command
AT+CMEE = <n> Enables/disables the report of result code.
+CME ERROR: <err>
as an indication of an error relating to the +Cxxx commands issued.
When enabled, device related errors cause the +CME ERROR: <err>
final result code instead of the default ERROR final result code.
ERROR is anyway returned normally when the error message is
related to syntax, invalid parameters, or DTE functionality.
Parameter:
<n> - enable flag
<n> = 0 - disable +CME ERROR:<err> reports, use only ERROR
report.
<n> = 1 - enable +CME ERROR:<err> reports, with <err> in numeric
format
<n> = 2 - disable +CME ERROR: <err> reports, with <err> in verbose
format
Test command
Example
Reference GSM 07.07
SW release Version A