User's Manual

GM862-QUAD / PY Hardware User Guide
1vv0300748 Rev. 1 - 24/10/06
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Right reserved page 65 of 70
10.1.3 EVB for Transchip camera support
In order to interface the Telit GM862 with a CMOS camera, Telit has developed an evaluation board.
The EVK allow connecting all Telit modules through 2 connectors of 40 pins each.
The I2CBUS DUAL CAMERA board is plugged in the 2 connectors of 30 pins each on the module
board.
MODULE
BOARD
MAIN
BOARD
CAMERA
BOARD