Manualshelf

User's Manual

ManualsBrandsTelit Communications ManualsElectronicsQuad-Band GSM/GPRS module
11121314151617181920
GM862-QUAD / PY Hardware User Guide
1vv0300748 Rev. 1 - 24/10/06
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Right reserved page 11 of 70
2.3.2 Antenna Connector
The Telit GM862-QUAD / PY includes one 50 Ohm MMCX coaxial female RF connector. On the user
application side the following connector must be used:
a) Telegärtner MMCX angle plug
crimp - Order n. J01340A0121
NOTE: be very careful when connecting the Telit GM862 Family modules RF connector. The RF
connector can be damaged if not connected with the proper antenna RF connector. The minimum
number of insertion cycles are recommended.