User's Manual

Telit GM862-QUAD/-QUAD-PY
Hardware User Guide
1vv0300692, Rev. ISSUE#0, - 04/10/2005
Reproduction forbidden without DAI Telecom written authorization – All Right reserved – Right of modification reserved page 46 of 69
n.c 16 VCLKOUT O
n.c 17 VALIDH O
n.c 18 VALIDV O
50 GPIO7
CAM_PWR_ON
O External 2.8V Regulator enable
controlled by CAM_PWR_ON pin
19 DVDD28 I
47 GPIO4
IICSDA_CAM
I/O I2C bus serial data 20 SDIN I/O
2-4-6 GND Ground 21 PS1 I
32 GPIO8
PD(0)
O Camera power type selector 22 PS2 I
2-4-6 GND Ground 23 SHIELD -
Flash Enable 24 LED_CTRL O
*
Filter the AVDD28.
**
Use a Buffer between module clk out, MON1_CAM and camera clk in, CLK_IN.
***
Non-connected.
Camera Socket Connector