User's Manual

Telit GM862-QUAD/-QUAD-PY
Hardware User Guide
1vv0300692, Rev. ISSUE#0, - 04/10/2005
Reproduction forbidden without DAI Telecom written authorization – All Right reserved – Right of modification reserved page 45 of 69
8.2 Camera Transchip
The GM862-QUAD provides a direct support for Transchip digital cameras with the following
characteristics:
8.2.1Camera interface connectors
The 50-pins Molex connector of the module and a 24 pins ZIF connector for the CMOS camera
provide the interface connection between GM862 and Transchip camera.
Molex 52991-0508 GM862
TC5747MF24L
Pin Signal I/O Notes Pin Signal I/O
46 GPIO3
PD(6)
O I2C bus serial clock 1 SCLK I
2-4-6 GND Ground 2 AGND I
50 GPIO7
CAM_PWR_ON
O External 2.8V Regulator enable
controlled by CAM_PWR_ON pin
3 AVDD28
*
I
34 GPIO9
PD(1)
O Camera Reset 4 RESET_N I
25 MON1
MON1_CAM
O Clock 5 CLK_IN
**
I
2-4-6 GND Ground 6 DGND I
n.c 7 DOUT_0 I/O
n.c 8 DOUT_1 I/O
n.c 9 DOUT_2 I/O
n.c 10 DOUT_3 I/O
n.c 11 DOUT_4 I/O
n.c 12 DOUT_5 I/O
n.c 13 DOUT_6 I/O
n.c 14 DOUT_7 I/O
n.c 15 DOUT_8 I/O
Type: TRANSCHIP TC5747
Technology: CMOS COLOR camera
Max picture size: VGA 480x640 pixels landscape
Output format: JPEG
Sensitivity: 4 Lux