User's Manual

Telit GM862-QUAD/-QUAD-PY
Hardware User Guide
1vv0300692, Rev. ISSUE#0, - 04/10/2005
Reproduction forbidden without DAI Telecom written authorization – All Right reserved – Right of modification reserved page 42 of 69
8 Camera
8.1 Agilent Camera
The GM862-QUAD provides a direct support for digital cameras with the following characteristics:
Type: AGILENT ADCM2650
Technology: CMOS COLOR camera
Max picture size: VGA 640x480 pixels
Output format: JPEG
Sensitivity: 5 lux
8.1.1 Camera interface connectors
The interface connection between GM862-QUAD and camera is provided by the 50-pins Molex
connector of the module and a 18-pins ZIF connector vertical type for the CMOS camera.
Molex 52991-0508 GM862 ZIF CF21181V0RP
Pin Signal I/O Function Pin Signal I/O
21 CAM_SYNC I End of frame is an output for the
camera and an input for the GM862-
QUAD.
16 EOF O
25 MON1_CAM O The module clock is provided by the
MON1_CAM output of the GM862-
QUAD.
17 MCLK I
28 IICSCL_CAM O IICbus serial clock 4 S_CLK I
32 PD(0) I/O Parallel Data 0 15 DATA0 I/O
34 PD(1) I/O Parallel Data 1 14 DATA1 I/O
38 PD(2) I/O Parallel Data 2 13 DATA2 I/O
40 PD(3) I/O Parallel Data 3 12 DATA3 I/O
42 PD(4) I/O Parallel Data 4 11 DATA4 I/O
44 PD(5) I/O Parallel Data 5 10 DATA5 I/O
46 PD(6) I/O Parallel Data 6 9 DATA6 I/O
49 PD(7) I/O Parallel Data 7 8 DATA7 I/O
47 IICSDA_CAM I/O IICbus serial data 3 S_DATA I/O