User's Manual

GL865-DUAL/QUAD V3 Hardware User Guide
1vv0301018 Rev.7 – 2013-10-30
Reproduction forbidden without written authorization from Telit Communications S.p.A. - All Rights
Reserved. Page 61 of 78
Mod. 0805 2011-07 Rev.2
13.3. Recommended foot print for the application
In order to easily rework the GL865-DUAL/QUAD V3 is suggested to consider on the
application a 1.5 mm placement inhibited area around the module.
It is also suggested, as common rule for an SMT component, to avoid having a mechanical
part of the application in direct contact with the module.
13.4. Stencil
Stencil’s apertures layout can be the same of the recommended footprint (1:1), we suggest a
thickness of stencil foil ≥ 120µm.