Product Description
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 7 of 75
o
Switch-slide Power-Supply
•
Internal antennas for:
o
BT
o
ZE60
•
Rechargeable Li-Ion battery
o
continuos charging application will be allowed
the battery charging will be stopped
when battery is completely charged.
•
Status Leds for:
o
BT
o
ZE60
o
Charger
o
ARM
•
Box
•
Power supply: external 4.5÷5.5V from mini-USB connector or 3.4÷4.2V from Li-Ion battery
•
Reset button
•
Operational Temperature: [-20°C +60°C]
•
Storage Temperature: [-40°C- +85°C]
2.2 Main Building Blocks features
•
ARM9 ATMEL AT91SAM9260
Based on the ARM926EJ-S™ ARM® Thumb® Processor
o
8-KByte Data Cache, 8-KByte Instruction Cache, Write Buffer
o
200 MIPS at 180 MHz
o
Memory Management Unit
o
EmbeddedICE™, Debug Communication Channel Support
o
External Bus Interface (EBI)
o
USB 2.0 Full Speed (12 Mbits per second) Device Port
o
USB 2.0 Full Speed (12 Mbits per second) Host Single Port in the 208-lead PQFP
o
Ethernet MAC 10/100 Base T
o
Fully-featured System Controller, including
o
Reset Controller, Shutdown Controller
o
Four 32-bit Battery Backup Registers for a Total of 16 Bytes
o
Clock Generator and Power Management Controller
o
Advanced Interrupt Controller and Debug Unit
o
Periodic Interval Timer, Watchdog Timer and Real-time Timer
o
Reset Controller (RSTC)
o
Clock Generator (CKGR)
o
Selectable 32,768 Hz Low-power Oscillator or Internal Low Power RC Oscillator on
o
Battery Backup Power Supply, Providing a Permanent Slow Clock
o
Power Management Controller (PMC)
•
Memories (Flash and RAM)
o
COMBO NAND SDRAM 128 MB FLASH/64 MB RAM
o
Memory will be shared for:
o
Code
o
Data