Product Description

Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 56 of 75
Local name 30 String Name of the local BT device N/A
Host address 6 Address of the host BT device N/A
Host name
30
String
Name of the host BT d
evice
N/A
If no host has been paired, host address is all-zero.
4.3.4.33 Scan for BT devices
Scan for discoverable BT devices. (Only for C1)
Local BT device is not discoverable. This command is not available when BT interface is active.
OPCODE:0x0021
Where field parameters is:
No parameter
Scan For BT response
A Scan Response, one for each device, will be received
Parameters field of Scan Response.
Status Address Name
Next table shows the valid range for the values of the parameters of the Scan Response .
Field size Valid Range Description Default
Status 2 0x0001-0x0003 or 0x0008 Result of the command N/A
Address 6 BT address N/A
Name 30 String BT name N/A
When scan is completed, status byte is 0x0008 and the other parameters are meaningless.
4.3.4.34 Add BT host
Put gateway in discoverable state and wait for pairing (only C1). One host can pair with GW. If host
has not a serial profile, it is not paired. When this command is sent, actual BT host is deleted. This
command is not available when BT interface is active.
OPCODE:0x0022
Where field parameters is:
Timeout