Product Description

USB interface is the default mode.
For C1, GPRS interface cannot be set.
For C2, BT interface cannot be set.
Only for configuration 1: If BT interface is active and no host device has been paired, control interface
goes to USB without restarting the gateway.
Only for configuration 2: If GPRS, BT or RS232 interface is active and USB cable from host is
connected, interface goes to USB without restarting the gateway. In this case, GPRS, BT or RS232
interface can be used only after the next reboot.
Set gateway mode response
Field Valid Range Description Default
Status 2 0x0001-0x0003 Result of the command N/A
4.3.4.7 Set GSM parameters
Set GSM parameters (only for C2). This command is not available when GPRS interface is active.
OPCODE:0x0007
Where field parameters is:
APN APN
login
APN
password
DNS Sim
pin
No parameter is mandatory.
If DNS field is equal to 0.0.0.0, provider’s DNS is used.
Field size Valid Range Description Default
APN 30 String APN hostname apn.apn.com
APN login
30
String
Username for APN login
user
APN password 30 String Password for APN login 1234
DNS 4 IP address DNS server Provider‘s DNS
SIM PIN 2 0000-9999 SIM PIN 1234
Set GSM parameters response
Status