Product Description

Field
size
Valid Range
Description
Default
channel 1 0x0B-0x1A RF channel for SR network 0x0B
Network ID 2 0x0000-0xFFFF Network ID for the SR network 0x1234
Old key 16 Any value Current Encryption word All 0x00
New key 16 Any value New Encryption word to be set N/A
Wakeup
session
duration
1 1-254 Wakeup session duration in sec 29
Comm session
duration
1 0-255 Comm session duration in sec 120
Comm slot
duration
1 0-255 Comm slot duration in sec 15
Set GW SR parameters response
Field size Valid Range Description Default
Status 2 0x0001-0x0003 or
0x0005-0x0006
Result of the command N/A
4.3.4.5 Set DXT SR parameters
Set SR parameters in a DXT.
OPCODE:0x0005
field parameters is:
Address channel Network
ID
Old
Encryption
key
New
Encryption
key
Fast period Slow
period
MAC address parameter is always mandatory.
If a new encryption has to be set, old and new encryption keys are mandatory.
If the SR module in the gateway is off or in idle, it performs a wakeup session and then starts a comm
slot with the DXT. If the SR module in the gateway is in comm session, scan is not performed. Comm
slot will be ended after settings and SR module in the gateway will be turn off.
NOTE: gateway will wait comm slot seconds for the dedicated wakeup response. If fast period will be
greater than comm slot seconds, setting and getting registers or data from a DXT could fail.
Generally, if slow period is greater than (wakeupSession/2 + 1), DXT could not wake up (see [3]).
Field size Valid Range Description Default
Address 8 MAC address from DXT MAC address N/A
Status