User's Manual

GE910 Hardware User Guide
GE910 Hardware User GuideGE910 Hardware User Guide
GE910 Hardware User Guide
1vv0300962 Rev.9-bis3 2013-05-20
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 17 of 87
Mod. 0805 2011-07 Rev.2
3.3. LGA PADs Layout
TOP VIEW
A B C D E F G H J K L M N P R
1 ADC IN1 RES RES GND RES GND GND GND ANT_GSM GND VBATT VBATT_PA VBATT_PA
2 GND EAR+ RES RES GND GND GND GND GND GND GND VBATT VBATT_PA VBATT_PA GND
3 SIMVCC EAR- RES RES RES RES RES RES RES RES RES GND GND GND GND
4 SIMIN MIC+ RES RES GND GND GND GND
5 SIMIO MIC- RES GND GND GND
6 SIMCLK DVI_RX RES GND GND GND
7 SIMRST DVI_TX RES RES RES
GNSS
_LNA_EN
8 RES DVI_CLK GPIO_01 RES GND GND
9 RES DVI_WA0 GPIO_02 RES GND ANT_GNSS
10 RES RES GPIO_03 RES GND GND
11 RES RES GPIO_04 RES RES
VAUX /
PWRMON
12 RES RES GPIO_06 RES GND RES RES ON_OFF*
13
USB
_VBUS
GND GPIO_07 RES RES RES RES RES RES RES RES RES RES GND
HW_SHUT
DOWN*
14 RES GPIO_05 VRTC RES GND RES GNSS_EN* RES
GNSS
_NMEA_TX
GNSS
_NMEA_RX
C105/RTS C108/DTR C109/DCD C107/DSR C125/RING
15 USB_D+ USB_D- TX AUX RX AUX RES GPIO_10 RES RES GPIO_08 GPIO_09 C104/RXD C103/TXD C106/CTS
NOTE:
The pin defined as RES has to be considered RESERVED and not connected on any pin in the
application. The related area on the application has to be kept empty.
Pin G14; J14; K14; R7; R9 are available only on GE910-GNSS variant.