User Guide

GE9
GE9GE9
GE910 Hardware User Guide
10 Hardware User Guide10 Hardware User Guide
10 Hardware User Guide
1vv0300962 Rev.4 2012-06-25
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 63 of 73
Mod. 0805 2011-07 Rev.2
13. Debug of the GE910 in production
To test and debug the mounting of the GE910, we strongly recommend to foreseen test pads on
the host PCB, in order to check the connection between the GE910 itself and the application and
to test the performance of the module connecting it with an external computer. Depending by the
customer application, these pads include, but are not limited to the following signals:
• TXD
• RXD
• ON/OFF*
• HW SHUTDOWN*
• GND
• VBATT
• TX_AUX
• RX_AUX
• PWRMON