User's Manual

GE866-DUAL Hardware User Guide
1VV0301051 Rev. 2 – 2014-04-07 7
Reproduction forbidden without written authorization from Telit Communications S.p.A. - All Rights
Reserved. Page 62 of 82
Mod. 0805 2011-07 Rev.2
12.1.3. Low Pass Filter Example
12.2. ADC Converter
12.2.1. Description
The on board A/D converter is a 11-bit converter. It’s able to
read a voltage level in the range of 0÷2 volts applied on the
ADC pin input, store and convert it into 11 bit word.
Min
Max
Units
Input Voltage range
0 1.2
Volt
AD conversion
- 10
bits
Resolution
- > 1
mV
The GE866-QUAD module provides one Analog to Digital
Converters.
The input line is:
ADC_IN
Available on pin F4