User's Manual

GE865 Hardware User Guide

1vv0300799 Rev.11 – 13-07-2010

15 Conformity Assessment Issues

The Telit GE865 Module has been assessed in order to satisfy the essential requirements of the

R&TTE Directive 1999/05/EC (Radio Equipment & Telecommunications Terminal Equipments) to

demonstrate the conformity against the harmonised standards with the final involvement of a Notified

Body.

If the module is installed in conformance to the Telit installation manuals, no further evaluation under

Article 3.2 of the R&TTE Directive and do not require further involvement of a R&TTE Directive

Notified Body for the final product.

In all other cases, or if the manufacturer of the final product is in doubt, then the equipment

integrating the radio module must be assessed against Article 3.2 of the R&TTE Directive.

In all cases the assessment of the final product must be made against the Essential requirements of

the R&TTE Directive Articles 3.1(a) and (b), Safety and EMC respectively, and any relevant Article 3.3

requirements.

This Hardware User Guide contain all the information you may need for developing a product meeting

the R&TTE Directive.

Furthermore the GE865 Module module is FCC Approved as module to be installed in other devices.

This device is to be used only for fixed and mobile applications. If the final product after integration is

intended for portable use, a new application and FCC is required.

The GE865 Module is conforming to the following US Directives:

Use of RF Spectrum. Standards: FCC 47 Part 24 (GSM 1900)

EMC (Electromagnetic Compatibility). Standards: FCC47 Part 15

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired

operation.

To meet the FCC's RF exposure rules and regulations: