User's Manual

GE864- QUAD Har dwar e User Guide
1vv0300872 Rev.1 2010-04-02
- All Rights Reserved. Page 60 of 77
12.9. Using the Temperature Monitor Function
12.9.1. Short Description
The Temperatur e Monitor is a function of the module that permits to control its
internal temperature and if proper ly set (see the #TEMPMON command on AT
Interface guide) it raise to High Logic level a GPIO when the maximum temper ature
is reached.
12.9.2. Allowed GPIO
The AT#TEMPMON set command could be used with one of the following GPIO:
Ball
Signal
Function
Type
Input /
output
curr ent
Note
C1
TGPIO_01
GPIO01 Configurable GPIO
CMOS 2.8V
1μA / 1mA
C2
TGPIO_03
GPIO03 Configurable GPIO
CMOS 2.8V
1μA / 1mA
K11
TGPIO_08
GPIO08 Configurable GPIO
CMOS 2.8V
1μA / 1mA
C9
TGPIO_09
GPIO09 Configurable GPIO
CMOS 2.8V
1μA / 1mA
H3
TGPIO_10
GPIO10 Configurable GPIO
CMOS 2.8V
1μA / 1mA
D1
TGPIO_11
GPIO11 Configurable GPIO
CMOS 2.8V
1μA / 1mA
G4
TGPIO_12
GPIO12 Configurable GPIO
CMOS 2.8V
1μA / 1mA
K10
TGPIO_13
GPIO13 Configurable GPIO
CMOS 2.8V
1μA / 1mA
B4
TGPIO_14
GPIO14 Configurable GPIO
CMOS 2.8V
1μA / 1mA
F5
TGPIO_15
GPIO15 Configurable GPIO
CMOS 2.8V
1μA / 1mA
H6
TGPIO_16
GPIO16 Configurable GPIO
CMOS 2.8V
1μA / 1mA
H5
TGPIO_17
GPIO17 Configurable GPIO
CMOS 2.8V
1μA / 1mA
K7
TGPIO_18
GPIO18 Configurable GPIO
CMOS 2.8V
1μA / 1mA
B1
TGPIO_19
GPIO19 Configurable GPIO
CMOS 2.8V
1μA / 1mA
C3
TGPIO_20
GPIO20 Configurable GPIO
CMOS 2.8V
1μA / 1mA
E8
TGPIO_22
GPIO22 Configurable GPIO
CMOS 1.8V
(not 2.8V !!)
1μA / 1mA
The set command could be used also with one of the following GPIO but in that case
the alternate function is not usable:
Ball
Signal
Function
Type
Input /
output
curr ent
Note
E6
TGPIO_02
GPIO02 Configurable GPIO
CMOS 2.8V
1μA / 1mA
Alternate function (JDR)
B3
TGPIO_04
GPIO04 Configurable GPIO
CMOS 2.8V
1μA / 1mA
Alternate function (RF
Transm ission Control)
K8
TGPIO_05
GPIO05 Configurable GPIO
CMOS 2.8V
1μA / 1mA
Alternate function (RFTXMON)
L9
TGPIO_07
GPIO07 Configurable GPIO
CMOS 2.8V
1μA / 1mA
Alternate function (BUZZER)