User's Manual

GE864- QUAD Har dwar e User Guide

1vv0300872 Rev.1 2010-04-02

Ball

Signal

I/ O

Function

Inter nal PULL UP

Type

NOTE:

The GE864-QUAD has one DVI port on the system inter face.

the DVI2 port as this minimizes the impact on the module functionality.

NOTE:

RESERVED pins must not be connected

NOTE:

If not used, almost all pins must be left disconnected. The only exceptions are the

following pins

RTS should be connected to the GND (on the module side) if flow control is not used.

signal

J1,K1,J2,K2

VBATT

A1,F1,H1,L1,H2,L2,J3,K3,L3,

K4,K5,D6,K6,L6,A11,F11,L11

GND

ON/OFF*

TXD

RESET*

RXD

RTS