User's Manual

GE864
GE864GE864
GE864-
--
-QUAD Automotive V2 Hardware User Guide
QUAD Automotive V2 Hardware User GuideQUAD Automotive V2 Hardware User Guide
QUAD Automotive V2 Hardware User Guide
1vv0300840 Rev.3 2010-04-08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 22 of 71
The following flow chart shows the proper Reset procedure:
For example:
Let us assume you need to drive the RESET# pad with a totem pole output of a +3/5 V
microcontroller (uP_OUT2):
This signal is internally pulled up so the pin can be left floating if not used.