User's Manual

GE864-AUTO Hardware User Guide
1vv0300779 Rev.0 - 20/06/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 11 of 62
Ball Signal I/O Function Internal PULL UP Type
G5
G6
G7
H4
H6
H7
J4
J6
J7
K9
K10
K11
L5
L7
L10
* Ref. to Digital Voice Interface Application Note 80000NT10004a.
NOTE: RESERVED pins must not be connected
NOTE: If not used, almost all pins should be left disconnected. The only exceptions are the following
pins:
pin signal
J1,K1,J2,K2
VBATT
A1,F1,H1,L1,H2,L2,J3,K3,L3,
K4,K5,D6,K6,L6,A11,F11,L11
GND
J5
ON/OFF*
E7
TXD
A2
RESET*
H8
RXD