User's Manual

GE/GC864-QUAD V2 and GE864-GPS Hardware User Guide
1vv0300915 Rev.2 – 2011-06-15
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights
Reserved. Page 88 of 97
14.2. Assembly the GC864-QUAD V2
The position of the Molex board to board connector and the pin
1 are shown in the following picture.
NOTE:
The metal tabs present on GC864-QUAD V2 must be connected to
GND.
This module could not be processed with a reflow.