User's Manual

GE/GC864-QUAD V2 and GE864-GPS Hardware User Guide
1vv0300915 Rev.2 – 2011-06-15
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights
Reserved. Page 84 of 97
14. Assembly the GE/GC864-QUAD V2 AND
GE864-GPS on the Board
14.1. Assembly the GE864-QUAD V2
The Telit GE864-QUAD V2 have been designed in order to be
compliant with the standard lead-free SMT process.
14.1.1. Recommended foot print for the application
Lead
-
free Alloy:
Surface finishing Sn/Ag/Cu for all
solder pads
Pin A1