User's Manual
INTRODUCTION
DE5468U 5
15 ELECTRICAL APPLIANCES (CONTROLLED VIA EXISTING ELECTRICAL CABLING).
ON/OFF BY VARIOUS FACTORS AS PROGRAMMED BY THE INSTALLER
X-10 #1 X-10 #2 X-10 #3 X-10 #4 X-10 #5 X-10 #6 X-10 #15
KEYFOB
TRANSMITTER
UP TO 8
WIRELESS
REMOTE
COMMANDERS
EXISTING ELECTRICAL
CABLING IN WALLS
EMERGENCY
PENDANT
TRANSMITTERS
POWERLINE
INTERFACE
MODULE
WIRELESS
DETECTORS
(UP TO 28 UNITS)
INSTALLED IN
THE PROTECTED
PREMISES
SMOKE
DETECTOR
UNIVERSAL
PERIMETER
PROTECTION
DETECTOR
DOOR OR
WINDOW
OPEN/CLOSE
DETECTOR
MOTION
DETECTOR
FLOOD
DETECTOR
LOCAL
COMPUTER
(OPTION)
PGM OUTPUT FOR
CONTROLLING DEVICES
BY VARIOUS FACTORS
AS PROGRAMMED
BY THE INSTALLER
GSM
TELEPHONE
EXCHANGE
UP TO 2
HARD WIRED
DETECTORS
GAS
DETECTOR
EXTERNAL
GSM UNIT
TEL
TV
Radio
Shutter
Air conditioner
INTERNAL
SIREN OR
STROBE
CENTRAL MONITORING
STATIONS
PUBLIC
TELEPHONE
EXCHANGE
4 PRIVATE
TELE-
PHONES
TEL. LINE
USER
COMPUTER
WIRELESS
SIREN OR
EXTERNAL
SIREN
CENTRAL
MONITORING
STATION
UP TO
TWO
2-WAY
KEYPADS
UP TO 8
PROXIMITY
TAGS
2-WAY KEYFOB
TRANSMITTER
A COMBINATION OF UP TO 8
INTERNET
PAGER COMPANY
COMPUTER
PAGER
ROUTER
POWERLINK
Figure 2. Typical System Configuration
System Features
System FeaturesSystem Features
System Features
Your PowerMax Pro offers a large number of unique
features:
• 30 zones: Each protected zone is identified by
number and by name (ask your installer to assign
names to your zones).
• Multiple arming modes: AWAY, HOME, AWAY-
INSTANT, HOME-INSTANT, LATCHKEY and
BYPASS.
• Liquid crystal display (LCD): Plain-language
status information and prompts are displayed on
the front panel in large, clear letters.
• Real-time clock: The present time is visible on the
display.
• Various reporting destinations: Events are
reported automatically to central monitoring
stations, private telephones of your choice and
even to a pager.
• Selective reporting: Your installer can determine
what type of event will be reported to which
destination.
• Latchkey mode: An automatic “Latchkey” message
is sent to chosen telephones if the system is
disarmed by a “latchkey” user (a junior family
member, for instance).
• Spoken announcements and instructions:
Status- dependent, pre-recorded verbal messages
are heard over the built-in loudspeaker (if the voice
prompts are enabled - see chapter 7).
• Message exchange: Before leaving the premises,
you may record a short verbal message for other
users of the system who may arrive later. Upon
arrival, you can listen to verbal messages left by
others for you.
• Keypad and wireless control: Full control from
the keypad; major functions can be carried out by
pressing buttons on hand-held miniature
transmitters.