User's Manual

USER SETTINGS
26 DE5468U
'
Moving forward
Moving backward
Moving one level
up in the menu
Return to
“<OK> TO EXIT”
To move within
most of
the menus, the following
keys can be used:
Show / confirm
data
' ' ' ' ' ''
SET TIME&FORMAT
device number (2-digit)
'
'
SCHEDULER
'
DEVICE No.
Black box is displayed
regarding 2-way X-10 unit
If you enter “00” and
press OK, PGM is displayed
(See figure 8)
SUNDAY MONDAY TUESDAY WEDNESDAY FRIDAY SATURDAY DAILY
''''
start - HH:MM
stop - HH:MM
or
TIME - - / - -
(enter start/stop time)
'
Notes
1. Select time in 10 minute interval only.
2. To erase a displayed time, press OFF.
'
'
OPERATION No. 1 OPERATION No. 2 OPERATION No. 3 OPERATION No. 4
THURSDAY
Figure 8 DETAIL "A" - Scheduler Function
Enrolling Keyfob Transmitters
Enrolling Keyfob TransmittersEnrolling Keyfob Transmitters
Enrolling Keyfob Transmitters
Keyfob transmitters are multi-button wireless units of
the CodeSecure™ type. Eight system users carry
keyfob transmitters to exercise better, quicker and
safer system functions control. Your control panel
must recognize the unique identification code (ID) of
each such keyfob to respond to commands
transmitted by them.
Before anything else, gather up all keyfob units you
intend to enroll, and make sure they all have
batteries installed.
Keyfob transmitter enrolling involves the following
steps:
A. Having entered your Master User Code
successfully (see above - Entering the User
Settings Menu), Click the
button
(repeatedly, if necessary) until the display will
read:
ENROLL KEYFOB
B. Click . The display will read:
KEYFOB No: _
C. Suppose that the Keyfob you are about to enroll
is to be designated as Keyfob No. 5. Assuming
that memory location No. 5 is free - no keyfob has
yet been enrolled to it - click the <5> key. The
display will change to:
KEYFOB No: 5
The clear space at the far right tells you that the
memory location is free.
D. Click
. The display will prompt you
to initiate a transmission from the chosen keyfob:
TRANSMIT NOW
E. Initiate a transmission from the chosen keyfob by
pressing any one of its pushbuttons. In response,
the “Happy Tune” (- - - –––) will sound and the
display will change to:
KEYFOB No: 5
A dark box will appear at the far right, indicating
that the chosen Keyfob has been enrolled as
Keyfob No. 5.
Note: If the same keyfob is already enrolled
elsewhere, the “Happy Tune” will sound twice in
succession.
F. From this point on, you may continue in several
different directions:
• If you wish to enroll another keyfob, select
the desired number by: -
- Clicking
to go up (6%7%8.....)
- Clicking
to go down (4%3%2.....)
- Clicking
% <keyfob #>.
• To return to the main menu, click
.
This will bring back the display:
<OK> TO EXIT