User's Manual

USER SETTINGS
DE5468U 25
RECALL BYPASS
(5)
SET PHONE NUMBER
(1)
SET USER CODES
(1)
AUTO ARM OPTION
AUTO ARM TIME
(1)
(1)
SET VOICE OPTION
(1)(6)
ENROLL KEYFOB
(1)
'
'
'
'
'
'
'
ENROLL PROX TAG
(1)
'
SHOW BYPASS
SET BYPASS
READY 00:00
(5)
(5)
'
'
SQUAWK OPTION
SET TIME&FORMAT US FORMAT - 12H EU FORMAT - 24H
TIME _ _:_ _A TIME _ _:_ _
'
[time] e.g. 07:55P
'
[time] e.g. 19:55
DATE DD/MM/YYYY DATE MM/DD/YYYY
SET DATE&FORMAT
(1)
(1)
(1)
(4)
if not satisfied
'
if not satisfied
'
'
'
'
'
'
'
'
'
'
TIME 07:55 P TIME 19:55
'
'
squawk disable
sqwk low volume
sqwk mid volume
sqwk hi volume
(To review options, use
or button)
'
Moving forward
Moving backward
Moving one level
up in the menu
Return to
“<OK> TO EXIT”
To move within
most of
the menus, the following
keys can be used:
Show / confirm
data
DATE: _ _/_ _/_ _ _ _
DATE:_ _/_ _/_ _ _ _
'
(date)
(2)
'
(date)
(2)
''
DATE 30/12/2000 DATE 12/30/2000
'
'
(e.g. 30/12/2000)
(e.g. 12/30/2000)
<OK> TO EXIT
'
(see detail “A”
in next page)
SCHEDULER
'
'
INSTALLER MODE
(1)
(1)
DEFINE PWRLNK
'
(1)
* PowerLink enrolling
success is accompanied
by a confirmation sound.
<OK> TO RECALL
user code 1 0 0 0 0
(for next user code 2,3....8)
[code]
user code 1 user code1
(example)
disable autoarm enable autoarm
(if it is the current option)
'
[time]
arm time _ _: _ _A
(See format & example in
“SET TIME&FORMAT” )
enable prompts
(if it is the current option)
Keyfob No : TRANSMIT NOW KEYFOB No : 1
'
'
disable prompts disable prompts
enable autoarm
enter keyfob #
for next (up) or previous (down) keyfob enrollment
'
'
'
'
(press any key)
''
'
'
1st private tel# 2nd private tel# 3rd private tel# 4th private tel#
PRESENT TAG
(for next prox tags 2,3....8)
Tag no : 1
(example)
'
Tag no : 1
BYPASS LIST
(3)
NORMAL MODE
<OK> TO BYPASS Z01: BYPASSED
Z01: OPEN
KITCHEN
Alternating
KITCHEN
Alternating
(for checking state of next zone)
ENTER CODE _ _ _ _
INSTALLER MODE
(example)
[4-digit master/user code]
USER SETTINGS
'
'
&
&
Tel. No.
&
&
&
Tel. No.
&
&
&
Tel. No.
&
&
&
Tel. No.
&
if not
satisfied
if not
satisfied
(First display is
READY / NOT READY)
2: PWRLNK FAILURE
disable report
report
<OK> to install
<OFF> to delete
1: INSTALL
Deleting PowerLink
Enrolling PowerLink
(*)
Entrance to INSTALLER
MODE (described in
the installer guide)
Notes: (1) Function inside black rectangles are accessible only if master user code was entered.
(2) For the year, enter the two last digits only.
(3) Press
to display the number, state and name of first bypassed zone. Press repeatedly to view all the bypassed zones.
(4) To enter "A" (AM) press
(or one of the 3 keys above it), to enter "P" (PM) press (or one of the 3 keys above it).
(5) SET/SHOW/RECALL BYPASS menus are accessible only if "manual bypass has been selected by the installer.
(6) In the SET VOICE OPTION, if you select "enable prompts", the Control Panel mute speaker button
is active.
Figure 8 - Users Settings Flow Chart