User's Manual

Telit GE863-QUAD / GE863-PY
Hardware User guide
1vv0300715, Rev. ISSUE#0, - 21/02/06
Reproduction forbidden without Telit Communication written authorization – All Right reserved – Right of modification reserved page 50 of 71
n.c n.c. 16 VCLKOUT O
n.c n.c. 17 VALIDH O
n.c n.c. 18 VALIDV O
31 VAUX O Power Supply 19 DVDD28 I
32 GPIO4 I/O I2C bus serial data 20 SDIN I/O
8-17.. GND Ground 21 PS1 I
6 GPIO8 O Camera power type selector 22 PS2 I
8-17… GND Ground 23 SHIELD -
Flash Enable 24 LED_CTRL O
*
Filter the AVDD28.
**
Use a Buffer between module clk out, MON1_CAM and camera clk in, CLK_IN.
***
Non-connected.
Fig 1. Camera Physical Detail & Connector