User's Manual

Telit GE863-QUAD / GE863-PY
Hardware User guide
1vv0300715, Rev. ISSUE#0, - 21/02/06
Reproduction forbidden without Telit Communication written authorization – All Right reserved – Right of modification reserved page 49 of 71
9 Camera
9.1 Transchip Camera
The GE863-QUAD/PY provides a direct support for Transchip digital cameras with the
following characteristics:
9.1.1 Camera interface connectors
The ballout of the module and a 24 pins ZIF connector for the CMOS camera provide the
interface connection between GE863-QUAD/PY and Transchip camera.
GE863-QUAD/PY signal TC5747MF24L
Pin Signal I/O Notes Pin Signal I/O
55 GPIO3 O I2C bus serial clock 1 SCLK I
8-17… GND Ground 2 AGND I
31 VAUX O Power Supply 3 AVDD28
*
I
5 GPIO9 O Camera Reset 4 RESET_N I
7 MON1_CAM O Clock 5 CLK_IN
**
I
8-17… GND Ground 6 DGND I
n.c n.c. 7 DOUT_0 I/O
n.c n.c. 8 DOUT_1 I/O
n.c n.c. 9 DOUT_2 I/O
n.c n.c. 10 DOUT_3 I/O
n.c n.c. 11 DOUT_4 I/O
n.c n.c. 12 DOUT_5 I/O
n.c n.c. 13 DOUT_6 I/O
n.c n.c. 14 DOUT_7 I/O
n.c n.c. 15 DOUT_8 I/O
Type: TRANSCHIP TC5747
Technology: CMOS COLOR camera
Max picture size: VGA 480x640 pixels landscape
Output format: JPEG
Sensitivity: 4 Lux