User's Manual

Telit GE863-QUAD / GE863-PY
Hardware User guide
1vv0300697, Rev. ISSUE#0, - 21/11/05
Reproduction forbidden without Telit Communication written authorization – All Right reserved – Right of modification reserved page 46 of 70
9 Camera
9.1 Agilent Camera
The GE863-QUAD provides a direct support for digital cameras with the following
characteristics:
Type: AGILENT ADCM2650
Technology: CMOS COLOR camera
Max picture size: VGA 640x480 pixels
Output format: JPEG
Sensitivity: 5 lux
9.1.1 Camera interface connectors
The interface connection between GE863-QUAD and camera is provided by the 18-pads ZIF
connector vertical type for the CMOS camera.
GE863-QUAD ZIF CF21181V0RP
Pad Signal I/O Function Pad Signal I/O
52 CAM_SYNC I End of frame is an output for the
camera and an input for the GE863-
QUAD.
16 EOF O
7 MON1_CAM O The module clock is provided by the
MON1_CAM output of the GE863-
QUAD.
17 MCLK I
33 IICSCL GPIO2 O IICbus serial clock 4 S_CLK I
6 PD0 I/O Parallel Data 0 15 DATA0 I/O
5 PD1 I/O Parallel Data 1 14 DATA1 I/O
4 PD2 I/O Parallel Data 2 13 DATA2 I/O
3 PD3 I/O Parallel Data 3 12 DATA3 I/O
2 PD4 I/O Parallel Data 4 11 DATA4 I/O
1 PD5 I/O Parallel Data 5 10 DATA5 I/O
55 PD6 I/O Parallel Data 6 9 DATA6 I/O
54 PD7 I/O Parallel Data 7 8 DATA7 I/O