User's Manual

Table Of Contents
GC864 Hardware User Guide
1vv0300733 Rev.12 – 2009-06-04
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
To meet the FCC's RF exposure rules and regulations:
The system antenna(s) used for this transmitter must be installed to provide a
separation distance of at least 20 cm from all the persons and must not be
co-located or operating in conjunction with any other antenna or transmitter.
The system antenna(s) used for this module must not exceed 1.4dBi (850MHz)
and 3.0dBi (1900MHz) for mobile and fixed or mobile operating configurations.
Users and installers must be provided with antenna installation instructions
and transmitter operating conditions for satisfying RF exposure compliance.
Manufacturers of mobile, fixed or portable devices incorporating this module are
advised to clarify any regulatory questions and to have their complete product tested
and approved for FCC compliance.
Reproduction forbidden without Telit Communications S.p.A’s. written authorization - All Rights Reserved. Page 67 of 69