User's Manual

GC864 Hardware User Guide
1vv0300733 Rev. 0 - 12/06/06
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Right reserved page 53 of 68
- n.c - - 14 DOUT_7 I/O
- n.c - - 15 DOUT_8 I/O
- n.c - - 16 VCLKOUT O
- n.c - - 17 VALIDH O
- n.c - - 18 VALIDV O
- VCC_MAIN_CAM O External 2.8V Regulator enable
controlled by CAM_PWR_ON
pin
19 DVDD28 I
D7 CAM_SDA/IIC_SDA I/O
I2C bus serial data
20 SDIN I/O
- GND - Ground 21 PS1 I
K11 TGPIO_08/CAM_ON O Camera power type selector 22 PS2 I
- GND - Ground 23 SHIELD -
- - - Flash Enable 24 LED_CTRL O
*
Filter the AVDD28.
**
Use a Buffer between module clk out, MON1_CAM and camera clk in, CLK_IN.
n.c = Not-connected.
Camera Socket Connector
11.1.2
11.1.3
11.1.4
Camera Socket Connector