User's Manual

GC864 Hardware User Guide
1vv0300733 Rev. 0 - 12/06/06
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Right reserved page 52 of 68
11 Camera
11.1 Camera characteristics
The GC864 module provides a direct support for digital cameras with the following characteristics:
11.1.1 Camera interface connectors
The 24-pads ZIF connector provides the interface connection between GC864 and camera.
GC864 ZIF 52437-2472
Ball Signal I/O Function Pin Signal I/O
C6 CAM_SCL/IIC_SCL O I2C bus serial clock 1 SCLK I
- GND - Ground 2 AGND I
- VCC_MAIN_CAM O External 2.8V Regulator enable
controlled by CAM_PWR_ON
pin
3 AVDD28
*
I
C9 TGPIO_09/CAM_RS
T
O Camera Reset 4 RESET_N I
F8 MON1/CAM_CLK O Clock 5 CLK_IN
**
I
- GND - Ground 6 DGND I
- n.c - - 7 DOUT_0 I/O
- n.c - - 8 DOUT_1 I/O
- n.c - - 9 DOUT_2 I/O
- n.c - - 10 DOUT_3 I/O
- n.c - - 11 DOUT_4 I/O
- n.c - - 12 DOUT_5 I/O
- n.c - - 13 DOUT_6 I/O
Type: TRANSCHIP TC5747
Technology: CMOS COLOR camera
Max picture size: VGA 480x640 pixels landscape
Output format: JPEG
Sensitivity: 4 Lux