User's Manual
Table Of Contents
- USER'S MANUAL
- INTRODUCTION
- useful numbers & access codes
- g83: several ways to make the most of it
- installing the sim card
- charging the battery
- getting started and basic features
- keypad
- display indicators and icons
- basic functions
- MENU
- CAMERA
- PHONEBOOK
- Calls log
- EMS/SMS MESSAGES
- EMS: WHAT THEY ARE AND HOW TO USE THEM
- Setting the SMS parameters
- Concatenated messages
- Writing and sending a new SMS/EMS message...
- Writing message text
- IT9/EMS menu
- There are two kinds of EMS items....
- HOW TO SEND THE MESSAGE YOU HAVE WRITTEN
- Reading the messages in your inbox
- To display your read and stored messages again...
- To delete all the messages...
- Reading an EMS message
- Saving an EMS item
- MMS messages
- Java
- Plus
- APPLICATIONS (menù 6)
- GPRS
- WAP browser
- functions in detail
8
DISPLAY INDICATORS AND ICONS
A
date and time display. To set the date and time, see see
page 44
incoming calls will be forwarded.
keypad is locked. To unlock it, hold , then .
P your phone is in roaming status (the telephone is on a GSM network
outside its home network, meaning that any calls made may be subject
to additional charges).
g You are registered on a GSM network that does not support roaming -
only calls to emergency numbers are possible in this case.
Network signal strength (maximum 5 bars); when the name of the GSM
network is not displayed, but the bars are, you can make calls to
emergency numbers only.
The alarm clock feature is turned on.
Earphones or another hands-free device is connected
You have unread EMS messages in your Inbox; if it’s red, it means that
the memory is full: cancel one or more EMS messages to be able to
receive others.
Battery power level: goes from 3 solid lines (battery fully charged)
down to blinking icon (battery low.
Battery charging phase: the lines displayed inside the battery light
up one-by-one, and stay on once the battery has finished charging
The note with a slash through it means that all ring signals have been
turned OFF - silent mode; the jagged lines indicate vibro-call is on.