User's Manual
Table Of Contents
- USER'S MANUAL
- INTRODUCTION
- useful numbers & access codes
- g83: several ways to make the most of it
- installing the sim card
- charging the battery
- getting started and basic features
- keypad
- display indicators and icons
- basic functions
- MENU
- CAMERA
- PHONEBOOK
- Calls log
- EMS/SMS MESSAGES
- EMS: WHAT THEY ARE AND HOW TO USE THEM
- Setting the SMS parameters
- Concatenated messages
- Writing and sending a new SMS/EMS message...
- Writing message text
- IT9/EMS menu
- There are two kinds of EMS items....
- HOW TO SEND THE MESSAGE YOU HAVE WRITTEN
- Reading the messages in your inbox
- To display your read and stored messages again...
- To delete all the messages...
- Reading an EMS message
- Saving an EMS item
- MMS messages
- Java
- Plus
- APPLICATIONS (menù 6)
- GPRS
- WAP browser
- functions in detail
4
INSTALLING THE SIM CARD
In order to activate the phone on a GSM network, you must use a valid “plug-
in" (small) format SIM card. The SIM card is available through your network
operator or service provider.
• Turn OFF the phone
• Press the chromium-plated button on the bottom of the phone and remove
the rear cover, lifting the bottom side.
• Looking at the rear side of the phone, the SIM slot is on the left, as shown in
the image below. Insert the SIM card with the cutted edge in the upper right.
• Put the cover back, by laying the upper side first, just below the CCD
window, then push the bottom side till the chromium-plated button is
fastened.