User's Manual

DE910 Series Hardware User Guide
1vv0300951 Rev.9 – 2015-05-11
Reproduction forbidden without written authorization from Telit Communications S.p.A. - All Rights
Reserved. Page 55 of 77
10.5. Indication of Network Service Availability
The STAT_LED pin status shows information on the network service availability and Call
status. In the DE910 modules, the STAT_LED usually needs an external transistor to drive an
external LED. Because of the above, the status indicated in the following table is reversed
with respect to the pin status:
LED status Device Status
Permanently off
Device off
Fast blinking
(Period 1s, Ton 0,5s)
Net search / Not registered / turning off
Slow blinking
(Period 3s, Ton 0,3s)
Registered full service
Permanently on
a call is active