User's Manual

CE910 Family Hardware User Guide
1vv0301010 Rev.11 – 2015-10-27
Reproduction forbidden without written authorization from Telit Communications S.p.A. - All Rights Reserved.
Page 73 of 75
17. Safety Recommendations
READ CAREFULLY
Be sure the use of this product is allowed in the country and in the environment required. The use of
this product may be dangerous and has to be avoided in the following areas:
 Where it can interfere with other electronic devices in environments such as hospitals, airports,
aircrafts, etc.
 Where there is risk of explosion such as gasoline stations, oil refineries, etc. It is the
responsibility of the user to enforce the country’s regulations and the specific environmental
regulation.
Do not disassemble the product; any evidence of tampering will compromise the warranty validity.
Follow the instructions of the hardware user guides for a correct wiring of the product. The product
has to be supplied with a stabilized voltage source and the wiring has to conform to the security and
fire prevention regulations. The product has to be handled with care, avoiding any contact with the
pads because electrostatic discharges may damage the product itself.
The system integrator is responsible for the functioning of the final product; therefore, care has to be
taken with the external components of the module as well as of any project or installation issue
because of the risk of disturbing the CDMA network or external devices or having impact on security.
Should there be any doubt, please refer to the technical documentation and the regulations in force.
Every module has to be equipped with a proper antenna with specific characteristics. The antenna has
to be installed with care in order to avoid any interference with other electronic devices and has to
guarantee a minimum distance from the body (20 cm). In case this requirement cannot be satisfied,
the system integrator has to assess the final product against SAR regulations.