User's Manual

CE910 Family Hardware User Guide
1vv0301010 Rev.11 – 2015-10-27
Reproduction forbidden without written authorization from Telit Communications S.p.A. - All Rights Reserved.
Page 12 of 75
2.2. Product Specifications
CE910 Specifications
Air Interface
CDMA 1xRTT
Frequency Bands
CE910-DUAL : 800/1900MHz
CE910-SC : 800MHz
CE910B-DUAL : 800/1900MHz (BC0/BC10/BC1)
Data Service
CDMA 1xRTT: 153.6 Kbps (full-duplex)
Max. RF out power
 CDMA BC0: Power class 3 (24.5dBm) for 1xRTT
 CDMA BC1: Power class 2 (24.5dBm) for 1xRTT
 CDMA BC10 : Power class 2 (24.5dBm) for 1xRTT
Typical conducted sensitivity
 CDMA BC0: –108dBm
 CDMA BC1: –107dBm
 CDMA BC10: -108dBm
Device dimensions
28.2mm(L) x 28.2mm(W) x 2.05mm(T)
Weight
3.7g
Storage and Operating
Temperature Range
–40 ~ +85°C
Normal operating voltage
range
3.4 ~ 4.2V
IO voltage
1.8V
Interface
 144 Land-Grid-Array interface
 10 general I/O ports maximum including multi-
functional I/Os
 State LED output
 1 A/D converter
 Full RS232 CMOS UART: baud rate up to 4Mbps
 Reserved two wires CMOS UART for debugging
 USB 2.0: baud rate up to 12Mbps
Antenna
Primary antenna, 800/1900MHz
Audio
 Analog audio interface ( 1 EAR/MIC)
Message
SMS (MO/MT)
Approvals
CE910-DUAL & CE910B-DUAL:
 Regulatory: FCC, IC
 Carrier: Verizon, Sprint, Aeris
CE910-SC:
 Regulatory: SRRC, CCC
2.3. RoHS Compliance
As a part of Telit’s corporate policy of environmental protection, the CE910 complies with the RoHS
(Restriction of Hazardous Substances) directive of the European Union (EU directive 2002/95/EG).